2.4 GHz Remote Control and a range of up to 1600ft, line of sight

Customization is easy, especially when it comes to our Panther series. Transmitters and receivers stand out for their ease of use and versatility.

Delivered in standard off the shelf configuration, with a variety of built-in operating modes and load selects or custom programmed to meet your specific requirements.

The primary benefit of our Panther line is safety. Systems that are set to operate in continuous mode, have transmitters send repeated “stay alive pulses”, similar to a heartbeat or ping to the receiver, prompting dedicated safety relay(s) to drop if the receiver loses “sight” of the transmitter’s stay alive signal (out of range, dead battery, broken transmitter, etc.).

Panther operates in the 2.4GHz frequency using 802.15.4 communication with direct sequence spread spectrum (DSSS), allowing for interference-free operation of hundreds of systems, in the same area, at the same time, without having to set specific channels or keep complicated frequency logs. Achieved by providing 16 channels, each allowing simultaneous operation of up to 12 systems within a single frequency channel.

– Transmitters / Receivers offer unique configuration possibilities, using built-in operating modes or through custom programming – flexibility!

– Transmitter buttons can be redirected to activate any relay or series of relays. Pressing just one button can start an almost unlimited chain of sequences, e.g. activating several relays that may stay energized for x-amount of time before another relay energizes.

– The receiver can be set to provide momentary or latching outputs with interlocks for relay pairs that control opposing functions

– The transmitter LED’s are programmable, for example, visually indicating whether a function has been activated or the selection of a specific receiver if the transmitter is set up to control multiple

– Customized transmitter faceplates for function descriptions and company identity available

Panther Radio Transmitters

Panther’s push-button transmitters come in many different forms and variations. The smallest one fits inside your pocket but there are also larger more robust versions for heavy-duty use. Their stable performance and build will keep you running day-in and day-out. Transmitters and Receivers are rated at a minimum IP65 and maximum IP67.

Panther Receivers

Receivers are available in different configurations, from small CANopen receivers to receivers with up to 19 relays. Selected receivers and our PN-T19-2 Transmitter are CAT3, PLd certified, making them one of the safest products on the remote control market. All housed in high-quality and robust enclosures with IP65 or IP66 ratings, depending on the product.